Skip to content

Track Bing Ads Leads and Customers in Keap

Bing Ads can send plenty of visitors to your site, but clicks alone do not tell you whether those visitors became leads, customers or revenue. This guide shows how to connect Bing Ads data to Keap so each new lead carries the ad, campaign, ad group and keyword that brought them in. You will also see how to turn that data into reports that help you decide where to spend more and where to cut back.

What you need before you start

You need a website form that creates or updates Keap records, a way to pass hidden field values from that form into Keap, and a consistent set of UTM parameters on your Bing Ads. The tracking tool described in this guide is a small script installed on your site. It reads UTM values, stores them in the visitor's browser, and writes them into hidden fields when a form is submitted. Your form tool then sends those values to Keap through its built-in integration or a connector such as Zapier.

Before changing live ads, agree on a naming convention. Use lowercase values where possible, keep campaign and ad group names stable, and avoid changing a campaign name after launch unless you are prepared for historical reports to split. The example below uses a simple structure that maps cleanly to Keap fields.

Step 1: Put UTM parameters behind your Bing Ads

UTM parameters are short text values appended to the destination URL. They tell your tracking tool which source, medium, campaign, ad group and ad produced the visit. A typical Bing Ads destination URL might look like this:

example.com/contact?utm_medium=paidsearch&utm_source=bing&utm_campaign=brand-campaign

The source material recommends these values for Bing Ads:

  • utm_medium: paidsearch
  • utm_source: bing
  • utm_campaign: the campaign name
  • utm_term: the ad group name
  • utm_content: the ad name

Use a UTM builder if you want to avoid typos. The important point is consistency: the same campaign should always produce the same utm_campaign value, and the same ad group should always produce the same utm_term value. If you use dynamic keyword insertion or Bing's own tracking parameters, confirm how those values appear in the final URL before you rely on them for keyword-level reporting.

Step 2: Install the tracking script and add hidden fields

Install the tracking script on every page that contains a lead form, either directly in the site template or through a tag manager. Then add hidden fields to each form. The field names must match the values your tracking tool expects. At minimum, add fields for channel, channel drilldown 1, channel drilldown 2 and channel drilldown 3. If you want landing-page reporting, add fields for the initial landing page and landing page group as well.

A practical field map looks like this:

  • Channel: Paid Search
  • Channel Drilldown 1: Bing
  • Channel Drilldown 2: Campaign name
  • Channel Drilldown 3: Ad group or ad name
  • Landing Page: the first page the visitor saw
  • Landing Page Group: a simplified group such as blog or services

Test each form after adding the fields. Submit a test entry with a known UTM URL and confirm that the values appear in the form submission and in the resulting Keap record. If a field is missing, the tracking script has nowhere to write the value, and the record will look like a direct or unknown visit even when the ad click was real.

Step 3: Confirm the data reaches Keap

When a visitor submits a form, the tracking script writes the stored UTM values into the hidden fields. Your form tool captures those values along with the visitor's name, email and phone number. It then sends the whole submission to Keap through a native integration or a connector such as Zapier.

Check the first few records manually. Open a new contact in Keap and confirm that the channel, campaign and ad group fields are populated. If they are blank, work backward: inspect the form submission, then the hidden field names, then the script installation, then the UTM values on the ad. This order separates a form problem from a tracking problem and saves time.

A worked example: from Bing click to Keap record

Imagine a law firm running a Bing Ads campaign for criminal defense enquiries. A visitor searches for a DUI defense term, clicks an ad and lands on the firm's contact page. The destination URL carries utm_source=bing, utm_medium=paidsearch, utm_campaign=criminal-defense and utm_term=dui-defense.

The tracking script stores those values in the browser. The visitor browses two more pages, then returns to the contact form and submits it. Because the values were stored, the form still receives the original campaign and ad group even though the visitor moved around the site. The form tool sends the submission to Keap, and the new contact record shows:

  • Channel: Paid Search
  • Channel Drilldown 1: Bing
  • Channel Drilldown 2: Criminal Defense Campaign
  • Channel Drilldown 3: DUI Defense Ad

That record can now be counted in a campaign report and, when the contact becomes a customer, in a revenue report. The same logic applies to any industry; the field names stay the same while the values change.

Three reports worth building in Keap

Once the data is flowing, build reports that answer specific budget questions rather than reports that simply list traffic.

Leads by channel. Group new leads by month and by channel. This shows whether Paid Search is growing or shrinking relative to organic search, social and referral. Use it to spot channels that deserve more investment and channels that are quietly declining.

Customers by Bing Ads campaign. Filter to contacts whose channel drilldown 1 is Bing, then group by campaign. This report shows which campaigns produce customers, not just clicks. A campaign with many leads and few customers is a candidate for review; a campaign with fewer leads but a strong conversion rate may deserve a larger budget.

Revenue by keyword. Group revenue from new customers by the keyword that triggered the ad. This is the report that connects spend to business outcomes. It helps you raise bids on keywords that produce revenue and reduce or pause keywords that produce traffic without customers.

Each report depends on clean field values. If campaign names change mid-quarter, the report will split into separate rows. If hidden fields are missing, the report will undercount Bing Ads and overcount direct traffic.

A decision checklist before you launch

Use this checklist to avoid the most common setup gaps:

  • Every Bing Ads destination URL has utm_source, utm_medium and utm_campaign.
  • Ad group and ad names are stable and do not include dates or temporary labels.
  • Every lead form has the same hidden field names.
  • The tracking script is installed on all pages that contain a form.
  • A test submission with a known UTM URL appears correctly in Keap.
  • At least one report groups leads by channel and one groups customers by campaign.
  • Someone owns the task of checking the reports monthly.

If you cannot complete the test submission, do not launch the campaign changes. A tracking gap discovered after launch is harder to reconstruct than one caught in a five-minute test.

What the tracking tool adds beyond Bing Ads

The same script can record visits from organic search, organic social, paid social, referral and direct channels. That matters because a Bing-only view can make paid search look more important than it is, or hide the fact that organic search is carrying most of your lead volume. By capturing all channels in the same way, you can compare them on the same footing and decide where the next dollar or hour should go.

The script also records the initial landing page and a landing page group. That lets you report on content pages, service pages or blog posts that start a customer journey, even when the final form is submitted on a different page.

Frequently asked questions

Do I need to change my Bing Ads destination URLs?

Yes. The tracking script reads UTM parameters from the URL, so each ad's final URL needs utm_source, utm_medium and utm_campaign at minimum. Add utm_term and utm_content if you want ad group and ad level reporting.

What happens if a visitor leaves the site and comes back later?

The script stores the UTM values in the visitor's browser. If they return and submit a form later, the original values can still be written into the hidden fields, provided the browser storage has not been cleared.

Why are my Bing Ads leads showing as direct traffic in Keap?

The most common causes are missing hidden fields on the form, a script that is not installed on the form page, or a destination URL without UTM parameters. Check the form submission first, then the hidden field names, then the script installation, then the ad URL.

Can I report on revenue by keyword?

Yes, if your Keap records include the keyword value and your customer revenue. Group new customers by the keyword that triggered the ad and sum their revenue. The report is only as reliable as the UTM values captured at the point of form submission.