Skip to content

UTM parameters for display ads: setup, testing and reporting

Display campaigns are only useful to manage when you can see what happened after the click. A consistent UTM structure lets you separate display visits from other channels, identify the network and campaign behind a visit, and carry that context through to a lead or customer record.

Why display clicks need UTM context

Display advertising can reach people across many websites and formats, but spend alone does not show whether those impressions produced visits, enquiries or sales. UTM parameters add that context to the destination URL. When they are applied consistently, a click can be traced from the ad network and campaign through to the landing session and, with the right form and CRM setup, to the resulting contact.

A practical starting structure is:

  • utm_medium=display, so analytics tools can place the session in the Display channel
  • utm_source set to the advertising network, such as google or google-display-network
  • utm_campaign set to a readable campaign name
  • utm_term used to distinguish creative or another useful grouping
  • utm_content used for the publisher site or a specific ad identifier

Keep values lowercase, consistent and readable. A report full of long numeric IDs is harder to interpret than one using names your team recognises.

Use a tracking template instead of editing every ad

A tracking template is the fastest way to apply the structure because the ad platform appends the parameters for you. The same idea exists under different names elsewhere: URL Dynamic Parameters in Meta Ads and URL Tracking Parameters in LinkedIn Ads.

In Google Ads, a template begins with the landing-page placeholder and then adds the UTM fields. Placeholders in curly brackets are replaced when an ad is clicked. The landing-page placeholder sends the visitor to the destination URL configured for the ad. A custom parameter, which begins with an underscore, is replaced with a value you define, such as a campaign name. A ValueTrack parameter has no underscore and is filled in by Google Ads, such as placement for the website where the click occurred.

For example, a brand campaign clicked on a publisher site could produce a destination URL containing display as the medium, the display network as the source, the brand campaign name and the publisher domain as the term. That combination makes the resulting session easy to find and filter later.

Build and apply the template in four steps

Decide first which fields you need: medium, network, campaign, creative grouping and publisher site are a sensible starting point. Other ValueTrack data, such as device type, may also be useful depending on how you analyse results.

Draft the template in a document before entering it into the ad platform. Adjust the fixed values to match your naming convention, then add custom parameters where you need readable campaign or ad group names. ValueTrack parameters are suitable for data Google Ads can supply automatically, but they do not provide readable campaign or ad group names.

Apply the template at account level when all campaigns should share the same structure. Use campaign level when search and display need different medium values in the same account. After adding the template, define each custom parameter at the campaign or ad group level where it is used, entering both the parameter name and its value.

Add it in Google Ads and test the generated URLs

Open the relevant campaign in Google Ads and choose Campaign Settings. Open Campaign URL Options, which may sit under Advanced Settings, paste the template and save it. If the template contains custom parameters, open the URL options again and enter the name and value for each one.

Then test the setup from the campaign tracking settings using the Test link. The preview lists the destination URLs for ads in the account, including the appended UTM parameters. Check a sample for the correct medium, network, campaign name and placement value. Fix missing or inconsistent values before the campaign generates reporting data you will later trust.

Choose values that match how you report

Each UTM field answers a different reporting question:

  • utm_medium identifies the broad channel, with display used for display advertising
  • utm_source identifies the network serving the ad
  • utm_campaign identifies the campaign or promotion
  • utm_term can distinguish creative or another mid-level grouping
  • utm_content can identify the publisher site or specific ad

This hierarchy matters because analytics tools commonly use the medium to assign a channel. Using display consistently helps display sessions appear in the Display channel rather than being grouped with search or social traffic. The source and campaign fields then provide the next level of detail for network and campaign comparisons.

Report visits, then connect leads and customers

For visits, check the User Acquisition report in Google Analytics. Display sessions should appear under the Display channel when utm_medium=display is used. Add a secondary dimension for first user source to compare networks, or first user campaign to compare campaigns. If your analytics setup differs, the same logic applies: filter or break down sessions by the medium, source and campaign values you appended to the ad URL, and confirm that display traffic is not being folded into another channel by a conflicting medium value. It is worth checking this early, because a mislabelled medium can quietly distort every later comparison between display and other paid channels. A useful evaluation question is whether each display campaign can be isolated in the report without manual URL filtering; if not, the naming convention or template placement usually needs adjusting before more spend is committed. Keep a short record of the values you chose so that later reports can be interpreted consistently, especially when campaigns are renamed or new networks are added. The aim is a reporting view where display visits are identifiable on their own and can be compared fairly with search, social and organic traffic. Visits alone do not show which sessions became leads or customers. For that, the UTM values need to travel with the enquiry. A capture tool can store the parameters from the landing session and write them into hidden form fields. On submission, those values are saved with the contact details in the form tool, included in notifications, or passed to the CRM. When evaluating a capture approach, check that it preserves the full set of parameters you rely on, that the hidden fields map cleanly to your form tool, and that the values survive the handoff into your CRM rather than being dropped or overwritten. A simple test submission from a known display URL is usually enough to confirm the chain works end to end. Once the UTM data is attached to each CRM contact, reporting can show how many display-sourced leads became customers, the revenue they generated and average deal size. That closes the loop between media spend, website visits, enquiries and commercial outcomes. The same contact-level data also supports comparisons between campaigns, networks and publisher placements, so budget decisions can rest on which display activity produced customers rather than which produced the most clicks. Where deal values are recorded in the CRM, revenue and average deal size can be reviewed alongside lead counts; where they are not, lead-to-customer conversion alone still gives a more useful picture than visit totals by themselves.

Pre-launch checklist

Start with a short checklist before launching or scaling a display campaign:

  • Confirm utm_medium=display is used for display traffic
  • Confirm the network name is consistent in utm_source
  • Confirm every campaign has a readable utm_campaign value
  • Confirm placement or publisher data is captured where site-level reporting is needed
  • Use the Test preview to inspect generated URLs
  • Confirm UTM values are written to form hidden fields
  • Confirm those values reach the CRM with each new lead

With those checks in place, display reporting can move beyond clicks and impressions to the visits, leads and customers each campaign actually produces.

Frequently asked questions

What is the simplest way to add UTM parameters to display ads?

Use a tracking template so the platform appends the parameters automatically. In Google Ads, start with the landing-page placeholder, add utm_medium=display, set the network in utm_source, pass a readable campaign name through a custom parameter, and use a ValueTrack placeholder such as placement where you want the publisher site captured automatically.

Should the template be applied at account or campaign level?

Account level is efficient when every campaign should share the same structure. Campaign level is better when search and display run in the same account and need different medium values, for example utm_medium=cpc for search and utm_medium=display for display.

How do custom parameters differ from ValueTrack parameters?

Custom parameters start with an underscore and you supply the value, such as a readable campaign name. ValueTrack parameters have no underscore and Google Ads fills them in, such as placement for the site where the ad was clicked. Campaign and ad group names need custom parameters because the available ValueTrack options provide IDs rather than readable names.

How can I check that the parameters are working?

Open the campaign tracking settings and use the Test link. Review the generated destination URLs and confirm that the medium, source, campaign and placement values appear as intended before relying on the data.

How do UTM parameters connect display clicks to leads and customers?

Web analytics can show display-driven visits through the Display channel and secondary dimensions for source, medium or campaign. To connect visits to leads and customers, the UTM values also need to be stored on the form submission and passed to the CRM with the contact, where conversion and revenue reporting can be run.